Why is my garage door not working?!

Your garage door may be there for almost ten years or more, which results in those days wherein it is not working.

Sometimes, it is not working due to problems you have not noticed.

It is indeed a hassle when you are in a hurry to go to work, and the garage door is not cooperating with you.

To ease your stress about the door, here are some of the problems that you might encounter, and these are also some of the ways to fix it.

Something is Blocked in the Photo-Eye

The photo-eye has been very useful in our garage doors because it can spot someone or a thing that is blocking the door while it is being lowered.

If there seems to be a problem with it, it is better to check for any damages like maybe the cord is not attached to the eye anymore or that it is destroyed.

Rainstorms or probably a water leak could have damaged the eye, so you might probably replace that.

On the other hand, if it is just dirty, clean it with a cloth or tissue piece.

The Power Source is Busted

You need to check if your power source is open because there are ridiculous times wherein others unplug it.

In this case, you must also see if a working outlet is attached to your garage door.

Other than that, examine the circuit breaker as well as the fuse and GFCI.

The Damaged Torsion Springs of Your Garage Door

When you hear a loud cracking noise coming from your garage, expect that is the sound of your breaking torsion springs.

These springs are considered to be the number one to damage your garage door.

If you encounter this situation, do not open the door until you call a professional to fix it.

Your Cables Probably Disengaged

Usually, when there is damage on your torsion springs, it can also lead to a snapped cable mostly attached to the wall.

Again, it is better to call for professional help because it might lead to accidents.

The Sensitivity of Your Garage Door Is Not Adjusted Well

If you installed a new garage door, it is best to read the manual and check if the sensitivity is adjusted.

Sometimes the door does not open when the settings of it are too low or high.

Also, you should close force and add limitations to the switch on the correct levels.

Garage door not working – Your Remote is Not Functioning

The remote control for your garage might not be working because it might be too old, the antenna is damaged, or that the signal is blocked.

If the garage door functions with a wall switch and not remote, a change of batteries are the option.

If it is not yet working, it is advisable to reprogram it.

Your Limit Setting is Not Set Properly

This setting checks how far the door moves to close.

If it seals all of a sudden, check the manufacturer’s instructions or the controls for your limit settings to be adjusted.

Start with small adjustments and test to see if it works.

The Door is Not Sliding Appropriately

Check if the door is rolling properly, track for any damages, and listen to the door if making unnecessary noise.

To fix this, try to adjust the screws with the use of a level and a mallet.

The Door Closes and Reverses Suddenly

Garage doors usually reverse when there is an obstacle to avoid accidents.

When this happens all of a sudden, it might mean that there is an unseen obstacle.

To prevent this, check if there is any stuff like dirt or debris and wipe down the tracks.

The Disconnect Switch is On

When there is a disconnect switch, you manually work on the door when there is a power outage.

It is advised that you check to make sure it is not disconnected.

The Door is Locked!

If it is functioning, but the door won’t move, the horrors of locked doors enter.

You need to see if there are metal pieces in the bar, if you notice any of it, look for the locking handle and disengage.

So if you encounter these kinds of problems in your garage door, do not worry because we might arrange that for you if you happen to live in Mississauga, Richmond Hill, Vaughan, and Woodbridge.

5 / 5 ( 1 vote )

Common garage door repair related FAQ

How long does it take to replace a garage door?

Roughly 3 to 4 hours, if done properly.

How often should my a garage door be serviced?

Your garage door is a large piece of moving equipment made up of many parts. Some families use their garage door more than their front door. We recommend having your garage door and operator serviced every year in order to ensure a properly working door and operator. The noises your door or operator makes are your initial “warning signs” that something is not quite right. The longer you put off the necessary service, the more damage may result.

How long do garage door springs usually last?

The most common torsion springs have an expected life of about 10,000 cycles (one opening and one closing is a cycle.)

What is the life span of a garage door opener?

The average life span of a door opener can vary from 10 to 20 years depending on the model and usage.

Related post

contact slider
close slider

    Are you a service provider looking for leads or a client looking for a service provider? Drop us a line!