Warehouse Garage Door Openers Repair

 Warehouse Garage Door Openers Repair

When operating a business that involves logistics operations, security, and efficiency should be of utmost importance, especially if you’ve invested in a warehouse garage door.

If you brought an automatic garage door opener, then you should expect to have optimal productivity and performance.

That’s because a garage door opener cuts the hassle of manually opening or closing your warehouse garage door.

But excessive wear and tear in the system can damage your warehouse garage door.

In that case, doing DIY repairs can lead to expensive damages and injuries, so only look for a reliable garage repair service.

In this article, we will talk about five common garage door problems and its solutions.

Garage Door Remote Doesn’t Work

If the wall switch works fine and your remote doesn’t, your remote could be out of battery.

Try changing a fresh pair of batteries and try if it solves the problem.

If that doesn’t solve the problem, it could be an antenna signal issue.

Make sure that the antenna is working, and try to move closer to the door, where the antenna is.

Most garage door openers nowadays have 315 MHz internal antenna, which operates on short range.

But if it still won’t work, you might need to replace your remote control. Or you can update your garage door opener to be Wi-Fi ready.

Its range is much better than that of a small antenna.

And you can easily manage your garage in any way you want, even setting rules for automatic opening and closing.

Wall Switch Garage Door Opener Doesn’t Work

When your remote switch works fine, but your wall switch doesn’t, you might have to replace the switch’s wirings or its circuit board.

Ask for assistance to the professionals to address this problem.

Garage Door Won’t Open

The most common reason for this is because the up-limit switch.

It may be out of adjustment and you need to realign it closer to the motor to elevate its opening.

This switch is usually a simple touch-lever mounted on the end of the track near the motor unit.

If adjusting the up-limit switch doesn’t do any difference, it absolutely needs repair or replacement.

Also, consider that problem could lie between the rollers and its track.

If there is a noise in opening the garage door, there is certainly too much friction.

And too much friction could also be the cause for your door not fully opening.

Garage Door Won’t Close

If the garage door has an up-limit switch, it also has a down limit switch.

Thus, this might be the reason why your entry won’t close all the way.

Just like the up-limit switch, you can also adjust the down-limit using a flat head screwdriver to loosen the screw adjustment and rotate it until you have the right adjustment.

If doing this won’t make any difference, it needs to be repaired or replaced.

If you own a modern garage door, at the bottom part of both sides of the garage door, you can see electronic sensors that observe anything that is in their line of sight.

These are called photo-eye sensors that serve as a countermeasure to prevent accidents.

Try to unplug and plug its connection again to reset the sensors.

Also, try to realign the sensors in case they have been moved.

If this doesn’t solve the problem, you might need to replace them.

Consult your garage door repair company and let them see and fix the issue.

Garage Door Reverses Before Hitting the Floor

This could also be because of the down limit switch.

Your down limit switch must be on the right position in order for it to function normally.

Conclusion

Moreover, you can see this YouTube video on how to repair a garage door opener to provide you some visual instructions that are easy to follow and understand.

Even after all the DIYs and your commercial garage door opener still doesn’t work, choose the smart way and contact us so we can help you anytime.

If you’re living in Edmonton might as well call us through telephone, (587) 804-2072.

Overhead Door Pros Garage Door Repair covers everything regarding garage door repair, even regarding garage door openers.

Rate this post

Related post

contact slider
close slider

    Are you a service provider looking for leads or a client looking for a service provider? Drop us a line!