Garage door springs remain as an essential component in letting the door operates smoothly, without encountering problems.
Springs works alongside the lift cables in carrying the overhead door, which means it almost has every weight during the operation: both opening and closing.
Because it is one of the components that are usually functioning and plays a massive role, literally, for sure, it would break eventually.
There are many different reasons why a spring might break.
Nonetheless, if it suddenly snaps, make sure to call garage door repair or overhead door repair and have them check the problem immediately.
Reason Why Your Springs May Snap
Since it always needs to function every time you operate your garage door, it is only natural that it will wear out.
According to experts, spring can only work 10,000 times, so if you run your door more than four times a day,
then its lifespan would probably last to seven years.
The lifespan is not the only issue or factor in the aging of the springs and the lack of lubrication.
Lubrication helps prevent springs from rusting quickly. So without the lubrication, the spring will wear out quickly.
Debris can also result in broken springs as it blocks the compression that happens when you operate the door.
That means that the spring cannot correctly function since there is something that jams it.
If the item is not removed immediately, then more likely,
it will cause damage to the spring over time, and eventually, snap, letting the door suddenly drop.
The last thing that will make your springs break is your irresponsibility in operating the door properly.
If you aggressively lift and close the door, then the spring will be under a lot more tension since you are adding more force for it to receive.
That is why, if you have that kind of habit, more or less, the lifespan of your springs will shorten.
Now those are the reason that could cause your garage door springs to break.
Knowing those, you must do what it takes to avoid having those situations happening to you.
Things to Do if Your Springs Snap
If ever you have done what it takes to avoid your spring from snapping, like removing the debris, carefully operating the door,
or even lubricating it, then the reason behind it would be natural aging.
As said above, a garage door springs have a limited time of compression it can handle, so being beyond the 10,000 will make it snap.
There are a lot of ways that you could do to deal with a broken spring, but leaving it alone is not part of it.
If you did not repair it immediately, it could cause many problems and accidents in your garage,
things like the door falling, damaging your car or your kids, and something like that.
So make sure to have a proper response to avoid the unnecessary incidents from occurring.
The first thing you will have to do is call for a garage door repair company or garage door emergency service,
have the springs inspected, and have their crew fix the problems.
It might take something like 30 bucks or so, but it is worth it since it can prevent you from spending a lot more money on compromising accidents.
If you think you can handle the repair yourself, then here is the step-by-step guide you should take.
First is to identify the type of spring you need to replace; it should be either the torsion spring or the extension spring.
Torsion springs are mostly found above the door as its primary purpose is to store the weight it is carrying in its compression and releasing it once you close the door.
Extension springs are found on the side of the door as it acts as support,
so the torsion spring will not need to carry every weight by itself.
The next thing you have to do is, of course, buy replacements.
Even if only one of the springs is broken, both of them should be replaced to make the calibration easily.
Lastly, install the springs.
Ensure that the springs you will remove are not compressed so that if you detach it from the rod, it will not release the force and damage you.