Garage Door Opener Chain Broke

 Garage Door Opener Chain Broke

With today’s wide selection of garage door openers, a chain drive opener is the most popular drive among homeowners.

Despite the device producing a loud clicking sound, the chain drive is highly durable and practically cheap.

Therefore, the chain opener lives up to its purpose without breaking your savings.

However, owing to everyday use of the garage door, the opener along with its components will deteriorate eventually.

Our hardware will reach its limit somehow.

But preserving its components is our job to keep it working seamlessly.

Garage Door Repair Pros Ottawa offers extensive services to keep your hardware in good condition.

When your garage door opener chain broke, don’t hesitate to give us a call! Our team is up 24/7 to respond to any type of repairs anywhere in Ottawa!

How Does A Chain Drive Opener Works?

Durability and functionality–a chain drive opener provides the required necessities we look for in an opener.

The chain drive is composed of a strip of metal chain, trolley, and a motor.

When prompted, the one responsible for pulling and pushing the chain is the trolley.

It may sound like an older opener version of its belt drive counterpart, but the chain drive has a remarkable lifting capacity.

Moreover, if you want to enjoy its seamless condition, always make preventive maintenance a habit.

By doing so, a chain opener may even outlast its counterpart’s lifespan.

If you’re not convinced with its practical features, a belt drive is a remarkable option for an opener as well.

Furthermore, when you’re considering installing a chain drive, make sure you don’t sleep next to the garage.

How to Inspect the Chain Drive

Everyday use, friction, and other accumulated damaging elements will wear out the chain drive as well.

However, when you ignore to provide it with grease and other upkeep needs, it will snap eventually.

After repairing or replacing your broken chain drive, set your calendar for the next maintenance check.

Usually, when your chain is loose or it has shifted from its position, the sprocket or gear is the main issue.

For now, here’s what we can do to get your hardware back to its working condition.

1. Visual inspection.

Before we proceed to the repairing process, let’s visually inspect and assess the extent of the damage. By doing so, do the following steps:

  • Prompt the door panel to open and close. If you notice the following problems during the test such as the panel is stalling or sticking, chances are the carriage assembly, motor, or chain is the issue.
  • Disconnect the opener from its power source. This will help us pinpoint the root cause and avoid accidents while working on the opener
  • Check for the presence of rust and corrosion
  • Make sure the bolts and nuts are intact and in place

2. Lubricate the moving component

If the chain opener is covered with rust, lubricate the component to remove the accumulated corrosion.

Moreover, if the component is heavily covered with rust, remove the chain and soak it with lubricant.

Once the corrosion has settled, remove the chain and wipe the excess lubricant with a towel.

3. Check the Carriage Assembly

Don’t reattach the chain just yet.

Check the carriage assembly for rust.

Then, clean and lubricate.

If you skip this part, the rust may transfer to the chain prompting you to remove and repeat the process.

Once you’re done, reattach the chain and adjust the carriage assembly accordingly.

4. Turn the opener back on

Once you’re done, reconnect the opener.

Then, do a performance test by opening and closing the door panel.

To remove any knocking sound, loosen the screws enough to eliminate the nuisance.

If the problem still exists, then it’s high time to call for technical support.

However, if the sound has been eliminated, give yourself a tap on the back.

Conclusion

By now, you have already understood the importance of regular upkeep.

Lack of maintenance is the main factor our hardware will break down.

Since we all consider the garage as the main entrance and exit of our property, keeping the hardware working is a must.

That’s why we should not neglect the hardware’s needed regular upkeep in preserving its working condition.

That’s because we’re not only preserving our hardware’s condition but including our entire household as well.

Keep it functional and preserve its components by regularly maintaining its condition.

Always set an appointment for your garage door’s optimal health.

Call for Technical Assistance Anywhere in Ottawa!

When your hardware lacks preventive maintenance checks, malfunctions are expected to happen somehow.

Given the materials of a chain drive, it does not break or snap easily.

But, in the absence of routine maintenance, it may likely hurt your savings.

To avoid any unexpected garage door malfunctions, call your nearby expert technician in Ottawa!

We have a wide selection of hardware repairs and installations to get your overhead door panel back to its working condition.

Book us and experience excellent services at an approachable price!

Rate this post

Garage Door Repairs FAQ

How do I fix a garage door the keeps reopening?

A garage door is programmed to travel a certain distance before it closes. If it closes before that distance has been traveled, it thinks something is wrong — and it reopens to help prevent any damage or safety risk. In cases such as this, most likely your garage door settings simply need to be adjusted.

One garage spring broke. I have 2, should I replace both?

Garage door springs should be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door’s operation. If you own 2 separate garage doors and only one spring has broken, it’s strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door’s position, when a spring breaks it can cause serious injury as well as damage your opener.

How do you fix a stuck open garage door?

First, check the track for obstructions. The area around the tracks needs to be completely clear. Second, check the remote; it could be a simple battery issue. If you still face an issue, manually unlock and gently try to close the door. If you still can’t find the problem, try giving us a call.

Can I manually open my garage door?

If your garage door does not open smoothly after pulling the releasing the cord, this could mean the door is off of its track, or the springs are broken. In either case, you should avoid trying to force the door open; doing so will only cause more damage.

How hard is it really to replace a garage door?

Installing a garage door isn’t as simple as installing a regular door. More so, installing it incorrectly can be dangerous.

Related post

contact slider
close slider

    Are you a service provider looking for leads or a client looking for a service provider? Drop us a line!