Garage Door Off Track Repair Toronto Ottawa
The garage door tracks keep your garage door in place.
When the door goes off-track, many reasons may have caused it to do so.
Fixing a track does not mean you just pop the door back in.
Depending on the severity of the problem, all of which needs a proper diagnosis of a trained professional, parts of the track may need replacement.
Here are some common reasons why garage doors come off track.
Common reasons why Garage Doors come Off Track
Dry Roller Bearings and Tracks
The friction caused by opening and closing the door may cause the roller bearings and tracks to dry out.
The weather can also be a factor in why these parts are drying out quicker than the rest.
When your door produces screeching sounds, then the problem may be dry roller bearings and tracks.
If that is the case, then the simple fix for that is adding grease.
However, you do not just add any type of grease.
The grease you need to use for your roller bearings and tracks are either silicone-based or lithium-based.
To avoid this problem, you need to lubricate these parts quarterly to make sure it does not dry out again.
Snapped cables may have been caused by sudden force on the axles and pulleys holding the cables in place.
When this happens, the lifting cables that keep the door in place have unequal tension.
Time is also a factor, causing the cable to wear out quickly.
The tension will cause the cable to snap in two and escape its spool, causing the door to escape from its track.
When that happens, you will need to keep your garage door closed.
There is nothing stopping it from crashing on anything beneath it.
The only way to repair a snapped cable is to replace it, along with its summative parts.
Broken/Worn Out Roller Bearings
There are three types of roller bearings; steel, plastic, and nylon roller bearings.
All of these bearings are prone to wearing out despite only functioning as rolling on its respective tracks.
When something causes it to crack, for example, a stone or a car hit the door and caused the roller bearings to break, then it will escape its track.
Broken roller bearings need to be replaced.
Depending on the weight of the door, a professional will diagnose which type of roller bearing is best for it.
Replacing it on your own is not generally encouraged due to the complex wiring that can end up electrocuting you.
A Misaligned Track
There are several reasons why the track becomes misaligned.
Roller bearings may have escaped from the tracks, causing the tracks to be distorted.
Another reason can be a car hitting the garage door, with force causing the door to escape the track.
When that happens, the track braces the brunt, and it becomes misaligned.
There are several factors to consider with a misaligned track.
A professional can simply do realignment if the damage is light.
However, if the tracks are misshapen and already impede the door’s function, it will need a full replacement.
Broken Torsion Spring
The torsion spring contracts and coils around the torsion shaft as the door opens and closes.
It is what enables you to open and close the door.
When the door is suddenly off-track due to a broken torsion spring, you will feel resistance when you open the door.
First of all, if this happens, do not open or close the door anymore.
A broken torsion spring is a safety hazard.
The torsion spring, once broken, cannot be repaired or put back together.
The reparation process is to replace both torsion springs.
Both springs need to be replaced so that it can start with equal tension.
Garage doors come off of its track for a multitude of reasons.
It can be a simple fix that you can do on your own to more drastic cases that require complete replacements.
We encourage you to save the number of a local garage door repair service near you.
We at Garage Door Repair Pros Ottawa aim to Fix and Go, making garage door ownership convenient for you.
Garage Door Repairs FAQ
How do I fix a garage door the keeps reopening?
A garage door is programmed to travel a certain distance before it closes. If it closes before that distance has been traveled, it thinks something is wrong — and it reopens to help prevent any damage or safety risk. In cases such as this, most likely your garage door settings simply need to be adjusted.
One garage spring broke. I have 2, should I replace both?
Garage door springs should be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door’s operation. If you own 2 separate garage doors and only one spring has broken, it’s strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door’s position, when a spring breaks it can cause serious injury as well as damage your opener.
How do you fix a stuck open garage door?
First, check the track for obstructions. The area around the tracks needs to be completely clear. Second, check the remote; it could be a simple battery issue. If you still face an issue, manually unlock and gently try to close the door. If you still can’t find the problem, try giving us a call.
Can I manually open my garage door?
If your garage door does not open smoothly after pulling the releasing the cord, this could mean the door is off of its track, or the springs are broken. In either case, you should avoid trying to force the door open; doing so will only cause more damage.
How hard is it really to replace a garage door?
Installing a garage door isn’t as simple as installing a regular door. More so, installing it incorrectly can be dangerous.